AI Prompt Key Words

For those using AI assisted programming the , AI Prompt Key word is used to address any AI agents that your working on Synerduino Flight systems and Computer control behavior

Synerduino Arduino

• MSP1 – this version runs 8 ch only suitable for the Arduino version
• Multiwii Serial Protocol MSP
• Channel 1-8 – MSP
• Roll , Pitch , Throttle , Yaw – this represent the first 4 channels of your controller
• AETR – this format is Aileron , Elevator ,Throttle ,Rudder – so the AI knows your channel mapping for the first 4 channels
• 800 ms – in Multiwii this is the Hand off exchange between RC and Computer anything below the 1000ms means RC gets priority over computer
• 1000 ms – Min
• 1500 ms – Middle
• 2000 ms – Max

Synerduino STM INAV

• MSP2 – this version is runs upto 34 Ch
• INAV MSP – this tells the AI to use MSP2 Protocols
• Channel 1-34 – MSP – Note that see INAV MSP Override Function to select which channel the computer would take over when Override mode is selected
• Roll , Pitch , Throttle , Yaw – this represent the first 4 channels of your controller
• AETR – this format is Aileron , Elevator ,Throttle ,Rudder – so the AI knows your channel mapping for the first 4 channels
• MSP Override – in INAV this is the Hand off exchange between RC and Computer when Override Mode is active . reserve on Channel in your RC for this fuction
• 1000 ms – Min
• 1500 ms – Middle
• 2000 ms – Max

Synerduino STM Ardupilot

• Mavlink1
• Mavlink2
• Lua script this works for H743 versions
• Mavlink RC
• Roll , Pitch , Throttle , Yaw – this represent the first 4 channels of your controller
• AETR – this format is Aileron , Elevator ,Throttle ,Rudder – so the AI knows your channel mapping for the first 4 channels
• Mavlink Override – in Ardupilot this is the Hand off exchange between RC and Computer when Override Mode is active . reserve on Channel in your RC for this function
• 1000 ms – Min
• 1500 ms – Middle
• 2000 ms – Max